HP Procurve 600 Redundant and External Power Supply
HP
|
| |||||||||||||||||||
| The ProCurve 600 Redundant and External Power Supply (RPS/EPS) has 6 RPS ports and 2 EPS ports. It can provide redundant +12 V power to any one of up to six switch products, backing up the built-in switch power supply in case of loss of AC power or a fault condition. The 600 RPS/EPS can also provide +50 Vdc external Power over Ethernet (P) power for up to two switch devices, with a maximum P power supply of 408 W. The EPS can provide full power for one device or half power for two devices. Each EPS port can provide P power for up to 24 Ethernet P ports. | ||||||||||||||||||||
| 6 redundant power supply ports Restrictions: Each port can provide redundant +12 V power to a connected switch; only one port can provide power at a given time 2 external power supply ports Restrictions: Provides +50 Vdc external P power to up to two switch devices; provides max of 408 W full power to one device, and half power (204 W each) if connected to two devices. | ||||||||||||||||||||
| Warranty | Lifetime warranty: for as long as you own theproduct, with next-business-day advancereplacement (available in most countries) | |||||||||||||||||||
| Barcode | 0829160221786 | |||||||||||||||||||
| Power | 408W | |||||||||||||||||||
Similar products
Ask a questionFeatures
- Power distribution on “as needed” basis: monitors power signal from connected switch; when power from switch is no longer detected, provides power to the switch within 1 millisecond
- Flexible configuration: two modes of operation: Combined Mode provides full 12 V RPS for stackables and combines the -50 V internal supply of the stackable PoE and the -50 V of the RPS/EPS unit for maximum PoE capability; RPS Mode provides RPS for the 12
- RPS device prioritization: if power to multiple connected switches fails, redundant power is provided to the highest priority switch; the lower the RPS port number, the higher the priority given
- Redundant switch power (6 ports): provides redundant power to any one of up to six switch products, backing up the power supply in a switch in case of loss of AC power or a fault condition
- External switch power (2 ports): provides external power to up to two PoE switch devices through two EPS ports; supports up to 15.4 W per port on 48-port stackable
- Hot plugging: supports changing the configuration of an RPS or EPS cable while the device is powered
- Supports ProCurve chassis and stackable products: power supply units can be configured to support both chassis and stackable switches
Specification
General | |
| The ProCurve 600 Redundant and External Power Supply (RPS/EPS) has 6 RPS ports and 2 EPS ports. It can provide redundant +12 V power to any one of up to six switch products, backing up the built-in switch power supply in case of loss of AC power or a fault condition. The 600 RPS/EPS can also provide +50 Vdc external Power over Ethernet (P) power for up to two switch devices, with a maximum P power supply of 408 W. The EPS can provide full power for one device or half power for two devices. Each EPS port can provide P power for up to 24 Ethernet P ports. | |
| 6 redundant power supply ports Restrictions: Each port can provide redundant +12 V power to a connected switch; only one port can provide power at a given time 2 external power supply ports Restrictions: Provides +50 Vdc external P power to up to two switch devices; provides max of 408 W full power to one device, and half power (204 W each) if connected to two devices. | |
| Warranty | Lifetime warranty: for as long as you own theproduct, with next-business-day advancereplacement (available in most countries) |
| Barcode | 0829160221786 |
Electrical | |
| Voltage | 100 to 240VAC |
| Frequency Range | 50 to 60Hz |
| Power | 408W |
Compliance | |
| Standards | Emissions FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A Immunity EN: EN55024/CISPR 24 ESD: IEC 61000-4-2, 4 kV CD, 8 kV AD Radiated: IEC 61000-4-3, 3V/m EFT/Burst: IEC 6100-4-4, 1.0 kV (power line), 0.5 kV (signal line) Surge: IEC 61000-4-5, 1 kV/2 kV AC Conducted: IEC 61000-4-6, 3V Power frequency magnetic field: IEC 61000-4-8, 1A/m, 50 or 60 Hz Voltage dips and interruptions: IEC 61000-4-11, >95% reduction, 0.5 period; 30% reduction, 25 periods Harmonics: EN 61000-3-2/IEC 61000-3-2 Flicker: EN 61000-3-3/IEC 61000-3-3 |
| Safety | CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950 |
Environmental | |
| Operating Temperature | Operating Temperature 0 to 55C |
| Storage Temperature | Storage Temperature -40 to 70C |
| Operating Humidity | Humidity 15 to 95% |
Physical | |
| Dimensions | 44.3cm (W) x 32.59cm (D) x 4.39cm (H) - Weight 5.3kg |
Bigger picture
Compatible Products
Safe and Secure
Memory Express is certified secure by Comodo, the world's leading authority on web security
Checkout and Order
You have items in your basket.
Checkout
You could also consider
NB You do not need to log in or register to place an order. Logins are to our corporate purchasing system and for those customers with existing terms.
| Your email | |
| Your question | |
| Product | HP Procurve 600 Redundant and External Power Supply |
